Frameless Inflatable Fishing Boats
Sea Eagle's Frameless Fishing Boats are roomy, lightweight, ultra-portable, pack into a small bag, and can be stowed in small spaces because they have no frames. They don't require a trailer so you can carry them to the most remote, hard to reach locations where fish hide most!
Great for lakes, rivers, bays, creeks or almost any body of water. Sea Eagle Frameless Fishing Boats will take you where you want to go and where most other boats wouldn't dare!
Large air chambers allow these Frameless Fishing Boats to support an incredible amount of weight yet draft as little as 4 inches of water. Meaning you have access to shallower waters where heavier boats don't!
The 285fpb and STS10 are equipped with universal Scotty™ Mounts so you can customize these two models as you wish! Outfit them with any Scotty accessory you like. Sea Eagle offers an assortment of Scotty™ accessories to suit your needs. The PackFish 7 features 2 built in rod holders to keep your rods secure.
Sea Eagle PackFish7™ is a unique, ultralight, incredibly portable, one man fishing boat that can be used two ways: (1) fished for hours while sitting on the comfortable inflatable Deluxe Fishing Seat, (2) standing with the wooden floorboard which provides stable and ample standing area for both sight fishing and casting.
The hull weighs only 21 lbs. and fully loaded with floorboard, oars and seat a mere 32 lbs. It goes anywhere, sets up in under 5 minutes and can even be worn on your back! It's as simple as that! We call it the "grab and go fishing boat!"
The unique U-hull configuration of this one man fishing boat provides the maximum fishing space with the least amount of hull weight.
It can be used two ways - rowed with the included oars or fully rigged, with motor mount for small gas or electric engines. The wooden floorboard provides stable and ample standing area for casting and the pedestal swivel seat turns 360° for the perfect view of your surroundings. Weighing only 59 lbs, with the floorboard, swivel seat and motormount, this is a super lightweight, super portable fishing craft.
The Hunter Green 285fpb is a stealthy inflatable boat that's perfect for fishing or hunting. It goes anywhere, sets up in just 5 minutes and can fit in the trunk of a car.
The Hunter Green Stealth Stalker 10 is a new kind of fishing boat equipped for use in various fishing conditions... on rivers, lakes, bays...in calm or rough weather. Comfortable for two, easily handled by one!
This roomy, portable, light weight boat features a fully enclosed hull for use on almost any body of water. Wide sectional floorboards provide plenty of fishing space and a conveniently located stow bag makes for easy access.
The Hunter Green Stealth Stalker 10 is a stealthy inflatable boat that's perfect for Fishing or Hunting. Lightweight and portable it goes anywhere and sets up in under 15 minutes!
Utilizing a round-hull configuration with an inside cockpit this enclosed boat gives anglers a safe secure feeling while fishing in calm or rough seas. A truly stable and functional fishing craft that can be used in a wide range of fishing and water conditions.
Specifications rotate phone
|Exterior||7' x 3'3"||9'x4'||10'1"x 5'|
|Interior||4'6" x 13"||6'2"x1'4"||7' 6" x 2' 4"|
|Hull Weight||21 lbs. (hull only), 26 lbs. (w/ floorboard)||30 lbs (hull only) 42 lbs. (with floorboard and motormount)||45 lbs (hull only), 78 lbs (w/ floorboards & motormount)|
|Load Capacity||1 person or 225 lbs.||1 person or 450 lbs.||2 Adults or 1200 lbs.|
|Total Max Load Capacity||300 lbs. with gear|
|Deflated||5" x 20" x 20"||Approx. 24" x 14" x 12"||Approx. 31" x 40" x 9"|
|Floorboard||1/2" thick x 3'6" long x 15 3/4" wide|
|Chambers||2 (main & additional upper safety chamber)||2||3 (port side, bow, starboard side)|
|Bladder||30 mil Polykrylar 2 chamber internal bladder|
|External Protective Cover||840 Denier Nylon|
|External Protective Floor||1000 Denier PVC coated Polyester|
|External Protective Cover Seams||Overlapped Double Stitched Industrial Strength Nylon Thread|
|Air Valves||2 Deluxe One Way||Recessed One Way||Recessed One Way|
|Inflation & Assembly time||Less than 5 mins||5 min.||15 min.|
|Seam||Bladder: High-Frequency Welded, Cover: Double Stitched Industrial Strength Nylon Thread||Quadruple Overlapping Superior Glued Seams||Quadruple Overlapping Superior Glued Seams|
|Material||30 mil Polykrylar, 840 Denier Nylon, 1000 Denier PVC coated Polyester||1000 Denier 36 mil||1000 Denier 36 mil|
|Engine Capacity||N/A||3hp (20" shaft minimum, 45 lbs. max weight) or 55 lb. max thrust (min 30" shaft, 45 lbs. max weight)||4 hp gas (20" shaft minimum, 45 lbs. max weight) or up to 74 lb. thrust electric (min 30" shaft, 45 lbs. max weight)|
|Floor||External Protective Floor: 1000 Denier PVC coated Polyester, Optional: Removable wooden floorboard||1000 Denier Reinforced||1000 Denier Reinforced|
|Inflation Pressure||1.2 psi||3.2 psi||3.2 psi|
|Speed Estimates||5-7mph w/gas, 3-4 mph w/Elec.||5-6 mph w/Gas, 4-5 mph w/Electric|