4" Inflatable External Keel with Rubbing Strake for extra protection
Rounded rear pontoons for rapid planing
Splash Guards on transom
Two stainless steel D-rings for towing
Four rear carry handles & one front lifting handle
Oarlocks pop up for instant use
3" Rubbing Strake around hull for extra protection
Two layers of material on lower tubes for greatest abrasion and puncture resistance
One self bailing drain valve
Boat Carry Bag included
Wide beam hull design for stability
Thousand Denier Reinforced Hull Material
UNBELIEVABLY Rugged: HIGH-PRESSURE FABRIC FOR OUR HIGH-PERFORMANCE BOATS
We use high-pressure fabric for our high-performance Explorer Kayaks, FastTrack Kayaks, PaddleSkis, Frameless Pontoon Boat, FoldCats, SailCat, Yacht Tender, and Sport Runabouts. The 1,000 denier woven base cloth gives tremendous strength and the PVC coating on both sides creates a waterproof, air-tight seal.
The triple-layer POWER of 1,000 Denier, Reinforced, High-Pressure Fabric:
Tough-as-nails Supported Fabric – Our tightly-woven base cloth is coated with several layers of a special polymer then fed through rollers under great pressure to force the coatings into the fabric creating a solid, waterproof, very tough material.
Omnidirectional Strength – Our high-performance boats can endure severe impact with sharp objects without puncturing. The fabric isn’t just tough; it has equal tear-resistance in all directions.
Quadruple Overlap Seams – We overlap all main seams with an additional layer of material above AND below for a total of 4 layers. At 36 mil each, the 4 layers together are nearly 144 mil thick — thicker than most other inflatables.
Long life additives – Our 1,000 denier high performance fabric is formulated with special additives to guarantee long term resistance to ultraviolet (UV) rays, gasoline, oil, and other chemicals.