Yacht Tenders from Sea Eagle
No Slat Floor
Older yacht tender designs have a floor made of a series of wooden slats. These
old slat floor systems are both heavy and uncomfortable to stand on, even in
flat water. There's no structure underneath the floor, so the slats move under
your feet as you step.
Sea Eagle Yacht Tenders are boats built with a purpose in mind - to give you a comfortable and convenient way to get to your yacht.
With the same 1000 denier construction as our Sport Runabouts, the 8.10yt Yacht Tender is more than strong enough to get the job done.
Get to the water - comfortably
Most Yachtsmen want a dinghy that they can easily inflate and deflate. Sea Eagle 8.10yt Yacht Tender can be inflated in just minutes, so it's very easy to get get from your car trunk to the water side.
Drop Stitch Floor Design
Unlike older slat-floor designs, the
Sea Eagle 8.10yt Yacht Tender has a rugged Drop Stitch floor that inflates up to
8 pounds of air pressure. This means you can stand up securely, even in choppy
condititions, making boarding a breeze for experienced yachtsmen and newcomers
Material you can hit with a hammer
Would you hit an inflatable boat with a claw hammer? We hit the 1000 denier hull material in our Sea Eagle boats with a claw hammer .... with the sharp claw end.
The Sea Eagle reinforced hull material can take this incredible pounding ... so you don't need to sweat bumping into the dock now and then.
What our Customers Say
My first day out in my new yacht 8.10 tender on the St. Joseph river in Niles, Michigan. This is the best exercise a person can get rowing this smooth running boat.This boat rows like a dream and easy to pump up and put in the water. I may never put a motor on it because it was so fun rowing, I felt like a kid again!
Oak Park, IL
Try a Sea Eagle Risk-Free... for 180 days!
We're confident that you'll love our Sea Eagle products - so we're putting our money where our mouth is.
Order a Sea Eagle today, and you'll get to try it for 180 days from the day you receive your boat, RISK FREE.
If you're not totally happy with your boat, just return it in good condition for a full refund of your purchase price.
Plus... A THREE YEAR WARRANTY
Our Sea Eagle boats are covered for a full three years against manufacturer's defects ... from bow to stern.
We can afford to offer this unprecedented two-part guarantee because of our 46 year experience in designing and selling inflatable boats. We know quality products, and we stand behind them.
8.10yt Yacht Tender
mouse over images to enlarge
Built with oversize 17" tubes for stability, bouyancy and ease of boarding, the 8.10yt is an ideal yacht tender. At just 59 lbs, it is easy to carry and packs down in a small, convenient package.
- Inflatable High Pressure Drop Stitch Floor
- All around rope lacing for stability
- Bow carry handle
- Two side D-rings for towing
- Pivoting oarlocks
- Easy open or shut self bailing Bravo drain valve located inside of boat for easy access
- All around rubbing strake for extra protection
- Carry bag
- Cone shaped rear pontoons for sharp turning
- Repair kit & printed instructions
||8' 10" x 4' 10"
||4 persons or 1067 lbs
||5 hp (gas engine)15" Shaft 75lbs. Max Weight
||5' 9" x 2' 6"
||39" x 24" x 9"
||4 (port, starboard, bow & floor)
||1000 Denier Reinforced
||Drop Stitch High Pressure Inflatable Floor
||Recessed Deluxe One Way Valves
||7 mph. with 2 adults & 2.5hp
Inflation & Assembly time:
2 discount packages available
8.10 yt Floor
- Easy inflation
- Stable enough to stand up and cast
- Easy boarding
Using revolutionary Drop Stitch technology, the floor of the 8.10yt will inflate to 8PSI in just minutes. Much more rigid than other inflatable floor systems, the Drop Stitch floor allows stand-up casting for fishermen and easy boarding for yachtsmen.
Aluminum Seat for Sport Runabouts
- Easy to install
- Rugged and lightweight
- Fits all Sport Runabouts (2005 and after)
- Fits 8.10yt Yacht Tender
Much more durable than wooden seats, the Sea Eagle aluminum bench seat is strong, comfortable and secure.
AB255 Sport Runabouts Oar Set
Designed for our Transom Boats, these oars connect with oarlock pins for fast, comfortable rowing. Collapsible for easy transport. 5 ft. 5 in. long.(pair)
A50 High Pressure Foot Pump
A high efficiency, high pressure bellows foot pump. Delivers up to 14.7 PSI for our Sea Eagle products that implement drop stitch technology like our LongBoard LB-11 and drop stitch floors in our Explorer Kayaks, FastTrack Kayaks & Sport Runabout 10.6SR RIK models.
Bow Bag for 8.10yt
- Rugged nylon construction
- Detaches in seconds with Quick Release Clips
This bag allows you to store the necessities for a day on the water - life jackets, anchor, rope, camera, food, etc. It fits neatly in the bow and lashes down securely to the hull.
- Two swatches of material (9" x 4 3/4")
- 1.5 oz. tube of glue
- Valve replacement tool
Repair kit for SailCat, Transom Sport Boats, Explorer Kayaks, FastTrack Kayaks, FoldCats and Paddleski models. Includes two pieces of hull material, tube of glue & Halkey-Roberts valve replacement tool.
Torqeedo Travel 1003S
- High power and range in a small package. Delivers the performance of a 3hp gas motor while offering 30% more battery capacity.
- Develops 4-5 times the power of traditional electric motors.
- Fully waterproof design, IP 67. All components can be submersed for 1 hour at 3' below surface without any harm.
- Integrated GPS and information system provides precise real-time information on battery charge status, remaining range at current speed, speed over ground and power consumption.
- Improved mechanical stability, ruggedness and suitability for salt water use.
- Auto-kickup feature in case of grounding.
- Battery and plug in charger included.
The perfect outboard for tenders, dinghies, transom boats, motormount boats and daysailers. Weighs 29.5 lbs. Short shaft - 23"
*Note: Non compatible with the 124smb (which uses the Torqeedo Travel 1003L)