This super lightweight little boat is easy to carry, easy to stow, easy to set up, easy to row, and easy to motor. This yacht tender weighs only 59 lbs. and packs small enough to stow easily below deck.
A great feature of this model is the surprisingly large inflatable tubes in relation to it's size - 17" tubes versus 8'10" length. Although it is only 8'10" long, it will easily hold 4 persons or up to 1067 lbs of people and gear.
Another great feature is the rigid inflatable drop stitch floor which provides structural strength, great standing rigidity and makes set up a dream! It only takes 5-7 minutes to inflate and fully set up this rugged little yacht tender. The Sea Eagle 8.10YT takes up to a 5 hp gas engine or up to a 74 lbs electric motor. This is a great little ship to shore runabout!
8.10 yt Specifications
8' 10" x 4' 10"
4 persons or 1067 lbs
5 hp,15" Shaft, 75lbs. Max Weight Gas Engine
5' 9" x 2' 6"
39" x 24" x 9"
4 (port, starboard, bow & floor)
1000 Denier Reinforced
Drop Stitch High Pressure Inflatable Floor
Recessed Deluxe One Way Valves
7 mph. with 2 adults & 2.5hp
Inflation & Assembly time:
click images to enlarge
8.10 yt Standard Features
Inflatable High Pressure Drop Stitch Floor
All around rope lacing for stability
Bow carry handle
Two side D-rings for towing
Easy open or shut self bailing Bravo drain valve located inside of boat for easy access
All around rubbing strake for extra protection
Cone shaped rear pontoons for sharp turning
Repair kit & printed instructions
Thousand Denier Reinforced Hull Material
UNBELIEVABLY Rugged: HIGH-PRESSURE FABRIC FOR OUR HIGH-PERFORMANCE BOATS
We use high-pressure fabric for our high-performance Explorer Kayaks, FastTrack Kayaks, PaddleSkis, Frameless Pontoon Boat, FoldCats, SailCat, Yacht Tender, and Sport Runabouts. The 1,000 denier woven base cloth gives tremendous strength and the PVC coating on both sides creates a waterproof, air-tight seal.
The triple-layer POWER of 1,000 Denier, Reinforced, High-Pressure Fabric:
Tough-as-nails Supported Fabric – Our tightly-woven base cloth is coated with several layers of a special polymer then fed through rollers under great pressure to force the coatings into the fabric creating a solid, waterproof, very tough material.
Omnidirectional Strength – Our high-performance boats can endure severe impact with sharp objects without puncturing. The fabric isn’t just tough; it has equal tear-resistance in all directions.
Quadruple Overlap Seams – We overlap all main seams with an additional layer of material above AND below for a total of 4 layers. At 36 mil each, the 4 layers together are nearly 144 mil thick — thicker than most other inflatables.
Long life additives – Our 1,000 denier high performance fabric is formulated with special additives to guarantee long term resistance to ultraviolet (UV) rays, gasoline, oil, and other chemicals.